THINK TWICE

The EcoDiesel's EGR cooler can crack, and this is the engine's most dangerous failure. Per the recall defect text, a cracked EGR cooler lets pre-heated vaporized coolant enter the EGR system, where the mixture can combust inside the intake manifold -- an under-hood fire risk. Two recalls cover it: 20V699000 for the 2014-2019 Jeep Grand Cherokee 3.0L EcoDiesel and 19V757000 for the 2014-2019 Ram 1500 EcoDiesel; the fix replaces the EGR cooler and, if needed, the intake manifold. The corpus carries this pattern in owner texts across both trucks -- leaking EGR coolers, unexplained coolant loss, white exhaust smoke, and engine-bay fires.

Check — Confirm the EGR-cooler recall is complete on the VIN (19V757000 for a Ram 1500, 20V699000 for a Grand Cherokee). Watch for coolant loss with no external leak, a coolant/sweet smell or white smoke from the exhaust, and any evidence of an under-hood fire or a replaced intake manifold.

The defining Dodge/Ram Hemi 5.7 failure is MDS lifter and camshaft wear -- the internal "Hemi tick": the multi-displacement-system (cylinder-deactivation) lifters on the deactivating cylinders wear and collapse and score the camshaft lobes. Owners report a top-end ticking, a cylinder misfire (P0300/P030x codes), rough running or shaking, metal in the oil, and in the worst cases stalling or a seized engine. 292 federal ENGINE complaints across the 2009-2019 Ram 1500, Durango, Grand Cherokee, Charger and 300 name lifters, camshaft, MDS or cylinder deactivation; among the mileage-known reports the failures cluster around 100,000 miles (median). These models are engine-mixed, so this describes the 5.7 Hemi specifically, not the 3.6 V6.

Check — Cold-start and listen for a persistent top-end tick that does NOT fade once warm (this is the catastrophic one -- distinct from the exhaust-manifold-bolt tick in HEMI-2); scan for stored or pending cylinder-misfire codes, and ask whether the camshaft or lifters were ever replaced and whether there is metal in the oil. A proper repair is a camshaft plus a full lifter set (sometimes a short block), so budget for a major engine repair on a high-mileage 5.7.

The EcoDiesel's high-pressure fuel pump is a catastrophic-failure risk. Recall 22V406000 covers the 2014-2020 Jeep Grand Cherokee and 2014-2019 Ram 1500 3.0L diesel: per its defect text, a high-pressure fuel pump (HPFP) failure can introduce internal debris into the fuel system, which can cause fuel starvation and an unexpected loss of drive power. The EcoDiesel uses a Bosch CP4-type HPFP, the same pump family notorious on other modern diesels for shedding metal into the injectors, rails, and lines when it fails, turning a pump failure into a whole-fuel-system job. The recall replaces the HPFP and inspects/replaces other fuel components; corpus texts describe these trucks losing power at speed and refusing to restart, with debris found in the fuel system.

Check — Confirm recall 22V406000 shows complete on the VIN. Ask whether the truck still runs its original HPFP or has had a pump/fuel-system replacement, and whether any metal contamination was found; a sudden stall-and-no-restart history is a red flag. Budget for the risk on an unrepaired high-mileage example.

A second, later Pentastar 3.6 failure mode is valvetrain wear: a rocker-arm roller wears, loosens and drops, throwing the rocker off the cam and producing a ticking or tapping that can escalate to a misfire or internal damage if driven on. 161 federal ENGINE complaints on the 2014-2019 3.6 models (Wrangler, Grand Cherokee, the vans, Charger and 300) name rocker arms or lifters. Owners report dealer rocker/lifter replacements and PCM reflashes, with the noise often appearing at highway mileage rather than when new.

Check — Listen for a persistent tick or tap that does not clear after an oil change and is not just cold-start injector noise; ask about any rocker-arm, lifter or valvetrain work and any PCM/ECM reflash. A tick left unaddressed can score the camshaft and turn a rocker job into an engine job.

A second, look-alike Hemi 5.7 "tick" is broken exhaust-manifold bolts, NOT an internal failure: the manifold bolts shear -- often loudest at cold start -- producing a ticking or tapping and an exhaust leak. 269 federal complaints, overwhelmingly on the Ram 1500 trucks (with a handful on the Durango, Grand Cherokee and Charger), describe broken manifold bolts or an exhaust-manifold tick. Owners routinely confuse this with the lifter tick in HEMI-1; it is a far cheaper, non-catastrophic repair, though snapped bolts can be hard to extract and a leak near the firewall can let exhaust fumes into the cabin.

Check — Distinguish it from the lifter tick: a manifold-bolt tick is loudest cold, is tied to an exhaust smell or a "leak"/ticking sound at the head, and throws NO misfire code. Inspect the exhaust manifolds for broken bolts and soot tracks; a durable repair replaces all the manifold bolts (many shops use an upgraded stud kit) rather than just the one that let go.