BUY WITH CARE

The defining Dodge/Ram Hemi 5.7 failure is MDS lifter and camshaft wear -- the internal "Hemi tick": the multi-displacement-system (cylinder-deactivation) lifters on the deactivating cylinders wear and collapse and score the camshaft lobes. Owners report a top-end ticking, a cylinder misfire (P0300/P030x codes), rough running or shaking, metal in the oil, and in the worst cases stalling or a seized engine. 292 federal ENGINE complaints across the 2009-2019 Ram 1500, Durango, Grand Cherokee, Charger and 300 name lifters, camshaft, MDS or cylinder deactivation; among the mileage-known reports the failures cluster around 100,000 miles (median). These models are engine-mixed, so this describes the 5.7 Hemi specifically, not the 3.6 V6.

Check — Cold-start and listen for a persistent top-end tick that does NOT fade once warm (this is the catastrophic one -- distinct from the exhaust-manifold-bolt tick in HEMI-2); scan for stored or pending cylinder-misfire codes, and ask whether the camshaft or lifters were ever replaced and whether there is metal in the oil. A proper repair is a camshaft plus a full lifter set (sometimes a short block), so budget for a major engine repair on a high-mileage 5.7.

A second, look-alike Hemi 5.7 "tick" is broken exhaust-manifold bolts, NOT an internal failure: the manifold bolts shear -- often loudest at cold start -- producing a ticking or tapping and an exhaust leak. 269 federal complaints, overwhelmingly on the Ram 1500 trucks (with a handful on the Durango, Grand Cherokee and Charger), describe broken manifold bolts or an exhaust-manifold tick. Owners routinely confuse this with the lifter tick in HEMI-1; it is a far cheaper, non-catastrophic repair, though snapped bolts can be hard to extract and a leak near the firewall can let exhaust fumes into the cabin.

Check — Distinguish it from the lifter tick: a manifold-bolt tick is loudest cold, is tied to an exhaust smell or a "leak"/ticking sound at the head, and throws NO misfire code. Inspect the exhaust manifolds for broken bolts and soot tracks; a durable repair replaces all the manifold bolts (many shops use an upgraded stud kit) rather than just the one that let go.